Order Helpline 01752 581 543 | Open today 8:00am-5:00pm
Order Helpline 01752 581 543

Pigeon Wire Triangular Ridge Bracket - Stainless Steel

Code:
PW212
Brand:

Features & Benefits: Pigeon Wire Triangular Ridge Bracket - Stainless SteelStainless Steel Ridge Bracket for mounting pigeon wire over ridge lines3 x 4mm X 90mm PostsSupports three parallel runs of pigeon wirePrevents pigeons from fouling ridges by placing wire where the... Read More

£8.24 Incl. VAT
Earn points

SUPER Rewards Earn points and build more across our SUPERSTORES!

Find out more
Oops! Please select from the options
Est. Delivery: 1-2 Working Days
Shipping costs displayed in basket.
We can let you know when this product is back in stock.

This product is proving to be very popular and has unfortunately sold out.

Enter your email below and we'll notify you as soon as this product is back in stock:

For delivery Tuesday, Dec 24th - order in:
days hrs mins secs
Subject to stock availability, if products on a 24 hours service are ordered alongside products NOT on a 24 hours service, this may delay your whole order.
View Transport Policy

All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlands and Islands, a member of our helpline team will contact you prior to processing your order should an additional delivery charge apply.

While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

Create a wishlist

"Good experience "

J Dodson

Description

Features & Benefits: Pigeon Wire Triangular Ridge Bracket - Stainless Steel

  • Stainless Steel Ridge Bracket for mounting pigeon wire over ridge lines
  • 3 x 4mm X 90mm Posts
  • Supports three parallel runs of pigeon wire
  • Prevents pigeons from fouling ridges by placing wire where they want to land
  • 110mm X 4mm single head posts, use one bracket every 1.5m
  • Can be screwed down or glued using Fix All

Where to Use:

For Use in protecting triangular roof ridges from perching feral pigeons and preventing the roof from being affected by bird droppings.|Use as a low-profile alternative to bird spikes on low pressure bird infestations.

How to Install:

  • Brackets can be fixed to ridges in two different ways. Bonding, preferred method, strongest (remove legs)
  • Mechanical Fix using screws in the holes provided, (remove legs) requires drilling of the ridge tile The bonding method is ideal for fragile tiles that do not take kindly to drilling. Ensure ridge tile is clean and dry and has been primed with adhesive prior to fitting bracket. Ensure that the bracket has been de-greased on the underside using surface activator. Leave for 24 hours to fully cure before wiring. Install brackets at no more than 1.5m centres
  • Install counter tension wires and screw pin anchor at each end of the ridge line without springs.
  • Run wires, stopping and starting at each bracket with a crimp and spring (do not run wires through the bracket)
  • Ensure wires are under load from the springs, but do not over-stretch the spring, leave some spring travel for when birds attempt to land.

There are no product specifications to show.

Downloads

There are no product downloads to show.

Questions & Answers

There are currently no questions for this product.

Have a question about this product?

loading...

Product Enquiry Form

Pigeon Wire Triangular Ridge Bracket - Stainless Steel